当前位置：首页 > news >正文

网站搭建免费域名锦州网站建设报价

news 2025/9/18 4:17:04

网站搭建免费域名,锦州网站建设报价,一个完整的网站技术,北京软件app开发为什么不用HAL库，使用HAL库捕获输入一个通道还尚可，多通道捕获由于HAL的回调函数不符合我的要求，干脆直接切换到LL库。网上找了许多，代码处理写的不符合我的要求，这里记录一下我的调试过程。 TIM2输出1路PWM信号&#…

为什么不用HAL库，使用HAL库捕获输入一个通道还尚可，多通道捕获由于HAL的回调函数不符合我的要求，干脆直接切换到LL库。网上找了许多，代码处理写的不符合我的要求，这里记录一下我的调试过程。
TIM2输出1路PWM信号，使用1分3杜邦线接到TIM3的CH2-CH3-CH4通道进行捕获输入。
在这里插入图片描述


#include "tim.h"/* TIM2 init function */
void MX_TIM2_Init(void)
{LL_TIM_InitTypeDef TIM_InitStruct = {0};LL_TIM_OC_InitTypeDef TIM_OC_InitStruct = {0};LL_GPIO_InitTypeDef GPIO_InitStruct = {0};/* Peripheral clock enable */LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);TIM_InitStruct.Prescaler = 63;TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;TIM_InitStruct.Autoreload = 9999;TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;LL_TIM_Init(TIM2, &TIM_InitStruct);LL_TIM_DisableARRPreload(TIM2);LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);LL_TIM_OC_EnablePreload(TIM2, LL_TIM_CHANNEL_CH2);TIM_OC_InitStruct.OCMode = LL_TIM_OCMODE_PWM1;TIM_OC_InitStruct.OCState = LL_TIM_OCSTATE_DISABLE;TIM_OC_InitStruct.OCNState = LL_TIM_OCSTATE_DISABLE;TIM_OC_InitStruct.CompareValue = 5000;TIM_OC_InitStruct.OCPolarity = LL_TIM_OCPOLARITY_HIGH;LL_TIM_OC_Init(TIM2, LL_TIM_CHANNEL_CH2, &TIM_OC_InitStruct);LL_TIM_OC_DisableFast(TIM2, LL_TIM_CHANNEL_CH2);LL_TIM_SetTriggerOutput(TIM2, LL_TIM_TRGO_RESET);LL_TIM_DisableMasterSlaveMode(TIM2);/* USER CODE BEGIN TIM2_Init 2 *//* USER CODE END TIM2_Init 2 */LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);/**TIM2 GPIO ConfigurationPB3     ------> TIM2_CH2*/GPIO_InitStruct.Pin = LL_GPIO_PIN_3;GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;GPIO_InitStruct.Alternate = LL_GPIO_AF_2;LL_GPIO_Init(GPIOB, &GPIO_InitStruct);//-------------------------------------------LL_TIM_OC_SetCompareCH2(TIM2,2000);LL_TIM_CC_EnableChannel(TIM2,LL_TIM_CHANNEL_CH2);LL_TIM_EnableCounter(TIM2);}
/* TIM3 init function */
void MX_TIM3_Init(void)
{LL_TIM_InitTypeDef TIM_InitStruct = {0};LL_GPIO_InitTypeDef GPIO_InitStruct = {0};/* Peripheral clock enable */LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM3);LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOA);LL_IOP_GRP1_EnableClock(LL_IOP_GRP1_PERIPH_GPIOB);/**TIM3 GPIO ConfigurationPA7   ------> TIM3_CH2PB0   ------> TIM3_CH3PB1   ------> TIM3_CH4*/GPIO_InitStruct.Pin = LL_GPIO_PIN_7;GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;GPIO_InitStruct.Alternate = LL_GPIO_AF_1;LL_GPIO_Init(GPIOA, &GPIO_InitStruct);GPIO_InitStruct.Pin = LL_GPIO_PIN_0;GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;GPIO_InitStruct.Alternate = LL_GPIO_AF_1;LL_GPIO_Init(GPIOB, &GPIO_InitStruct);GPIO_InitStruct.Pin = LL_GPIO_PIN_1;GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;GPIO_InitStruct.Alternate = LL_GPIO_AF_1;LL_GPIO_Init(GPIOB, &GPIO_InitStruct);/* TIM3 interrupt Init */NVIC_SetPriority(TIM3_IRQn, 0);NVIC_EnableIRQ(TIM3_IRQn);/* USER CODE BEGIN TIM3_Init 1 *//* USER CODE END TIM3_Init 1 */TIM_InitStruct.Prescaler = 63;TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;TIM_InitStruct.Autoreload = 65535;TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;LL_TIM_Init(TIM3, &TIM_InitStruct);LL_TIM_DisableARRPreload(TIM3);LL_TIM_SetClockSource(TIM3, LL_TIM_CLOCKSOURCE_INTERNAL);LL_TIM_SetTriggerOutput(TIM3, LL_TIM_TRGO_RESET);LL_TIM_DisableMasterSlaveMode(TIM3);LL_TIM_IC_SetActiveInput(TIM3, LL_TIM_CHANNEL_CH2, LL_TIM_ACTIVEINPUT_DIRECTTI);LL_TIM_IC_SetPrescaler(TIM3, LL_TIM_CHANNEL_CH2, LL_TIM_ICPSC_DIV1);LL_TIM_IC_SetFilter(TIM3, LL_TIM_CHANNEL_CH2, LL_TIM_IC_FILTER_FDIV1);LL_TIM_IC_SetPolarity(TIM3, LL_TIM_CHANNEL_CH2, LL_TIM_IC_POLARITY_RISING);LL_TIM_IC_SetActiveInput(TIM3, LL_TIM_CHANNEL_CH3, LL_TIM_ACTIVEINPUT_DIRECTTI);LL_TIM_IC_SetPrescaler(TIM3, LL_TIM_CHANNEL_CH3, LL_TIM_ICPSC_DIV1);LL_TIM_IC_SetFilter(TIM3, LL_TIM_CHANNEL_CH3, LL_TIM_IC_FILTER_FDIV1);LL_TIM_IC_SetPolarity(TIM3, LL_TIM_CHANNEL_CH3, LL_TIM_IC_POLARITY_RISING);LL_TIM_IC_SetActiveInput(TIM3, LL_TIM_CHANNEL_CH4, LL_TIM_ACTIVEINPUT_DIRECTTI);LL_TIM_IC_SetPrescaler(TIM3, LL_TIM_CHANNEL_CH4, LL_TIM_ICPSC_DIV1);LL_TIM_IC_SetFilter(TIM3, LL_TIM_CHANNEL_CH4, LL_TIM_IC_FILTER_FDIV1);LL_TIM_IC_SetPolarity(TIM3, LL_TIM_CHANNEL_CH4, LL_TIM_IC_POLARITY_RISING);/* USER CODE BEGIN TIM3_Init 2 */LL_TIM_EnableIT_UPDATE(TIM3);//更新中断使能LL_TIM_EnableIT_CC2(TIM3);//捕获通道2使能LL_TIM_EnableIT_CC3(TIM3);//捕获通道3使能LL_TIM_EnableIT_CC4(TIM3);//捕获通道4使能LL_TIM_CC_EnableChannel(TIM3,LL_TIM_CHANNEL_CH2);//通道2使能LL_TIM_CC_EnableChannel(TIM3,LL_TIM_CHANNEL_CH3);//通道3使能LL_TIM_CC_EnableChannel(TIM3,LL_TIM_CHANNEL_CH4);//通道4使能LL_TIM_EnableCounter(TIM3);/* USER CODE END TIM3_Init 2 */}uint32_t  TIM3_OverCnt = 0;
int32_t  Value_Temp2 = 0;
int32_t  Value_Temp3 = 0;
int32_t  Value_Temp4 = 0;uint32_t  TIM3_CH2_Capture_FristValue_1; 
uint32_t  TIM3_CH2_Capture_FristValue_2; 
uint32_t  TIM3_CH2_Capture_FristValue_3; 
uint32_t  TIM3_CH2_Capture_HighLevel; 
uint32_t  TIM3_CH2_Capture_LowLevel; 
uint8_t   TIM3_CH2_CaptureNumber;
//uint32_t  TIM3_CH2_Freq = 0;
//float 	  TIM3_CH2_Duty = 0;uint32_t  TIM3_CH3_Capture_FristValue_1; 
uint32_t  TIM3_CH3_Capture_FristValue_2; 
uint32_t  TIM3_CH3_Capture_FristValue_3; 
uint32_t  TIM3_CH3_Capture_HighLevel; 
uint32_t  TIM3_CH3_Capture_LowLevel; 
uint8_t   TIM3_CH3_CaptureNumber;
//uint32_t  TIM3_CH3_Freq = 0;
//float 	  TIM3_CH3_Duty = 0;uint32_t  TIM3_CH4_Capture_FristValue_1; 
uint32_t  TIM3_CH4_Capture_FristValue_2; 
uint32_t  TIM3_CH4_Capture_FristValue_3; 
uint32_t  TIM3_CH4_Capture_HighLevel; 
uint32_t  TIM3_CH4_Capture_LowLevel; 
uint8_t   TIM3_CH4_CaptureNumber;void TIM3_CallBack(void)
{	//------------------------------------------CC2if(LL_TIM_IsActiveFlag_CC2(TIM3)){		LL_TIM_ClearFlag_CC2(TIM3);if(TIM3_CH2_CaptureNumber == 0){TIM3_OverCnt = 0;TIM3_CH2_CaptureNumber = 1;	
//					  LL_TIM_SetCounter(TIM3,0);	}elseif(TIM3_CH2_CaptureNumber == 1){	TIM3_CH2_Capture_FristValue_1 = LL_TIM_IC_GetCaptureCH2(TIM3);	// 获取当前的捕获值. 即CCRx2  //设置下降沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH2,LL_TIM_IC_POLARITY_FALLING);						TIM3_CH2_CaptureNumber = 2;TIM3_OverCnt = 0;						}elseif(TIM3_CH2_CaptureNumber == 2){TIM3_CH2_Capture_FristValue_2 = LL_TIM_IC_GetCaptureCH2(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){								 						TIM3_CH2_Capture_HighLevel = TIM3_OverCnt * 65535 + TIM3_CH2_Capture_FristValue_2 - TIM3_CH2_Capture_FristValue_1;			}else{Value_Temp2 = TIM3_CH2_Capture_FristValue_2 - TIM3_CH2_Capture_FristValue_1;Value_Temp2 = Value_Temp2>0?Value_Temp2:0;							TIM3_CH2_Capture_HighLevel = TIM3_OverCnt * 65535 + Value_Temp2;}											//设置上升沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH2,LL_TIM_IC_POLARITY_RISING);		TIM3_CH2_CaptureNumber = 3;TIM3_OverCnt = 0;}elseif(TIM3_CH2_CaptureNumber == 3){TIM3_CH2_Capture_FristValue_3 = LL_TIM_IC_GetCaptureCH2(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){TIM3_CH2_Capture_LowLevel = TIM3_OverCnt * 65535 + TIM3_CH2_Capture_FristValue_3 - TIM3_CH2_Capture_FristValue_2;							}else{Value_Temp2 = TIM3_CH2_Capture_FristValue_3 - TIM3_CH2_Capture_FristValue_2;Value_Temp2 = Value_Temp2>0?Value_Temp2:0;TIM3_CH2_Capture_LowLevel = TIM3_OverCnt * 65535 + Value_Temp2;							}//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH2,LL_TIM_IC_POLARITY_FALLING);				TIM3_CH2_CaptureNumber = 4;TIM3_OverCnt = 0;}		elseif(TIM3_CH2_CaptureNumber == 4){//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH2,LL_TIM_IC_POLARITY_RISING);				TIM3_CH2_CaptureNumber = 1;TIM3_OverCnt = 0;}					}		//------------------------------------------CC3if(LL_TIM_IsActiveFlag_CC3(TIM3)){	LL_TIM_ClearFlag_CC3(TIM3);if(TIM3_CH3_CaptureNumber == 0){TIM3_OverCnt = 0;TIM3_CH3_CaptureNumber = 1;	
//					  LL_TIM_SetCounter(TIM3,0);	}elseif(TIM3_CH3_CaptureNumber == 1){TIM3_OverCnt = 0;TIM3_CH3_Capture_FristValue_1 = LL_TIM_IC_GetCaptureCH3(TIM3);	// 获取当前的捕获值. 即CCRx2  //设置下降沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH3,LL_TIM_IC_POLARITY_FALLING);						TIM3_CH3_CaptureNumber = 2;					}elseif(TIM3_CH3_CaptureNumber == 2){TIM3_CH3_Capture_FristValue_2 = LL_TIM_IC_GetCaptureCH3(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){			TIM3_CH3_Capture_HighLevel = TIM3_OverCnt * 65535 + TIM3_CH3_Capture_FristValue_2 - TIM3_CH3_Capture_FristValue_1;							}	else{Value_Temp3 = TIM3_CH3_Capture_FristValue_2 - TIM3_CH3_Capture_FristValue_1;Value_Temp3 = Value_Temp3>0?Value_Temp3:0;						TIM3_CH3_Capture_HighLevel = TIM3_OverCnt * 65535 + Value_Temp3;}	//设置上升沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH3,LL_TIM_IC_POLARITY_RISING);			TIM3_CH3_CaptureNumber = 3;TIM3_OverCnt = 0;}elseif(TIM3_CH3_CaptureNumber == 3){TIM3_CH3_Capture_FristValue_3 = LL_TIM_IC_GetCaptureCH3(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){					TIM3_CH3_Capture_LowLevel = TIM3_OverCnt * 65535 + TIM3_CH3_Capture_FristValue_3 - TIM3_CH3_Capture_FristValue_2;								}	else{Value_Temp3 = TIM3_CH3_Capture_FristValue_3 - TIM3_CH3_Capture_FristValue_2;Value_Temp3 = Value_Temp3>0?Value_Temp3:0;							TIM3_CH3_Capture_LowLevel = TIM3_OverCnt * 65535 + Value_Temp3;}	//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH3,LL_TIM_IC_POLARITY_FALLING);	TIM3_CH3_CaptureNumber = 4;TIM3_OverCnt = 0;}		elseif(TIM3_CH3_CaptureNumber == 4){//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH3,LL_TIM_IC_POLARITY_RISING);		TIM3_CH3_CaptureNumber = 1;TIM3_OverCnt = 0;}				}//------------------------------------------CC4if(LL_TIM_IsActiveFlag_CC4(TIM3)){	LL_TIM_ClearFlag_CC4(TIM3);if(TIM3_CH4_CaptureNumber == 0){TIM3_OverCnt = 0;TIM3_CH4_CaptureNumber = 1;	
//					   LL_TIM_SetCounter(TIM3,0);	}elseif(TIM3_CH4_CaptureNumber == 1){TIM3_OverCnt = 0;TIM3_CH4_Capture_FristValue_1 = LL_TIM_IC_GetCaptureCH4(TIM3);	// 获取当前的捕获值. 即CCRx2  //设置下降沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH4,LL_TIM_IC_POLARITY_FALLING);			TIM3_CH4_CaptureNumber = 2;}elseif(TIM3_CH4_CaptureNumber == 2){TIM3_CH4_Capture_FristValue_2 = LL_TIM_IC_GetCaptureCH4(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){					TIM3_CH4_Capture_HighLevel = TIM3_OverCnt * 65535 + TIM3_CH4_Capture_FristValue_2 - TIM3_CH4_Capture_FristValue_1;								}	else{Value_Temp4 = TIM3_CH4_Capture_FristValue_2 - TIM3_CH4_Capture_FristValue_1;Value_Temp4 = Value_Temp4>0?Value_Temp4:0;							TIM3_CH4_Capture_HighLevel = TIM3_OverCnt * 65535 + Value_Temp4;}	//设置上升沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH4,LL_TIM_IC_POLARITY_RISING);			TIM3_CH4_CaptureNumber = 3;TIM3_OverCnt = 0;}elseif(TIM3_CH4_CaptureNumber == 3){TIM3_CH4_Capture_FristValue_3 = LL_TIM_IC_GetCaptureCH4(TIM3);	// 获取当前的捕获值. 即CCRx2  if(TIM3_OverCnt >= 1){									TIM3_CH4_Capture_LowLevel = TIM3_OverCnt * 65535 + TIM3_CH4_Capture_FristValue_3 - TIM3_CH4_Capture_FristValue_2; 								}	else{Value_Temp4 = TIM3_CH4_Capture_FristValue_3 - TIM3_CH4_Capture_FristValue_2;Value_Temp4 = Value_Temp4>0?Value_Temp4:0;							TIM3_CH4_Capture_LowLevel = TIM3_OverCnt * 65535 + Value_Temp4; }	//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH4,LL_TIM_IC_POLARITY_FALLING);	TIM3_CH4_CaptureNumber = 4;TIM3_OverCnt = 0;}		elseif(TIM3_CH4_CaptureNumber == 4){//					//设置    沿触发LL_TIM_IC_SetPolarity(TIM3,LL_TIM_CHANNEL_CH4,LL_TIM_IC_POLARITY_RISING);		TIM3_CH4_CaptureNumber = 1;TIM3_OverCnt = 0;}				} //------------------------------------------Updateif(LL_TIM_IsActiveFlag_UPDATE(TIM3)){	LL_TIM_ClearFlag_UPDATE(TIM3); //每次溢出时间为65536usTIM3_OverCnt++;}}

#ifndef __TIM_H__
#define __TIM_H__#ifdef __cplusplus
extern "C" {
#endif/* Includes ------------------------------------------------------------------*/
#include "main.h"void MX_TIM2_Init(void);
void MX_TIM3_Init(void);
void TIM3_CallBack(void);#ifdef __cplusplus
}
#endif#endif /* __TIM_H__ */

#include "main.h"
#include "tim.h"
#include "gpio.h"void SystemClock_Config(void);int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_TIM2_Init();MX_TIM3_Init();while (1){}}

/*** @brief This function handles TIM3 global interrupt.*/
void TIM3_IRQHandler(void)
{TIM3_CallBack();}

查看全文

http://www.yayakq.cn/news/305076/

我想买个空间自己做网站网站制作商城

深圳手机网站建设多少钱一键生成app软件下载

甘肃精神文明建设网站易记域名网站大全

商贸公司营销网站建设seo公司排名

做海报一般都去什么网站看自己建网站好还是用淘宝做好

如何形容网站wordpress时间轴页面

三雷网站程序wordpress sqllite

fullpage wow做的网站哈尔滨大型网站建设电话

wordpress网站有多大wordpress 怎么添加即时联系窗口

网站开发服务费属于哪种进项营业执照注册

织梦dedecms教育培训网站模板wordpress网址转跳插件

做网站一定要后台嘛wordpress 5.0编辑器

电商网站设计方案软件开发专业有哪些课程

域名购买哪个网站旅游网站技术流程图

网站里的副栏目是什么做网站的平台有哪些

eclipse开发微网站开发昆明网站建设报价

网站开发工具的选择网站和公众号的区别

深圳惠州网站建设公司潮阳网站制作

php网站开发要学什么软件服务器主机管理系统建好后如何用它搭建网站

北京高端网站设计企业网站推广的渠道

网站右下角悬浮窗口js代码兼容各浏览器中国工程招标网

临沂网站制作报价装修网站推广方案

网站备案用的方案建设php做网站要多久

广东省建设工程金匠奖公布网站乌兰察布市建设工程造价网站

石家庄电商网站做动漫网站要多少钱

怎样查询网站建设时间朔州seo网站建设

相关文章：