当前位置： 首页 > news >正文

广东网站备案要多久seo服务公司深圳

news 2025/9/17 6:25:10
广东网站备案要多久,seo服务公司深圳,wordpress 建站完整视频教程,专门查建设项目的网站你好，这里是网络技术联盟站。 昨天给大家介绍了10个华为交换机的Python脚本： 10个华为华为交换机常用的Python脚本，网络工程师收藏！ 大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会…

你好，这里是网络技术联盟站。

昨天给大家介绍了10个华为交换机的Python脚本：

  • 10个华为华为交换机常用的Python脚本，网络工程师收藏！

大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会分享简单的，单一的脚本，后面会分享复杂的脚本！

今天给大家分享20个常用的Python脚本，用于控制和管理华为路由器：

1、登录和退出路由器：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"quit\n")

2、获取路由器的系统信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")for line in stdout:print(line.strip())client.close()

3、配置路由器端口：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"quit\n")tn.write(b"quit\n")

4、查看路由器端口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface GigabitEthernet0/0/1")for line in stdout:print(line.strip())client.close()

5、配置路由器的SNMP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"snmp-agent sys-info version all\n")
tn.write(b"snmp-agent community read public\n")
tn.write(b"snmp-agent target-host trap address udp-domain 192.168.2.2 params securityname public\n")
tn.write(b"quit\n")tn.write(b"quit\n")

6、配置路由器的ACL：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")tn.write(b"acl number 2000\n")
tn.write(b"rule 5 permit source 192.168.2.0 0.0.0.255\n")
tn.write(b"quit\n")tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"traffic-filter inbound acl 2000\n")
tn.write(b"quit\n")tn.write(b"quit\n")

7、配置路由器的静态路由：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"ip route-static 192.168.3.0 255.255.255.0 192.168.2.2\n")
tn.write(b"quit\n")tn.write(b"quit\n")

8、配置路由器的NAT：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/0\n")
tn.write(b"nat enable\n")
tn.write(b"quit\n")tn.write(b"nat address-group 1 192.168.2.0 0.0.0.255\n")
tn.write(b"nat server protocol tcp global 202.96.209.5 inside 192.168.2.100 80\n")
tn.write(b"quit\n")tn.write(b"quit\n")

9、配置路由器的DHCP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"dhcp enable\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"dhcp server excluded-ip-address 192.168.2.1\n")
tn.write(b"dhcp server pool 1\n")
tn.write(b"network 192.168.2.0 mask 255.255.255.0\n")
tn.write(b"gateway-list 192.168.2.1\n")
tn.write(b"dns-list 8.8.8.8 8.8.4.4\n")
tn.write(b"quit\n")tn.write(b"quit\n")

10、查看路由器的ARP表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display arp")
arp_table = stdout.readlines()for line in arp_table:print(line.strip())client.close()

11、查看路由器的MAC地址表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display mac-address")
mac_table = stdout.readlines()for line in mac_table:print(line.strip())client.close()

12、查看路由器的路由表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display ip routing-table")
route_table = stdout.readlines()for line in route_table:print(line.strip())client.close()

13、查看路由器的接口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface brief")
interface_table = stdout.readlines()for line in interface_table:print(line.strip())client.close()

14、查看路由器的系统资源使用情况：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display system resource")
resource_info = stdout.readlines()for line in resource_info:print(line.strip())client.close()

15、查看路由器的系统版本：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")
version_info = stdout.readlines()for line in version_info:print(line.strip())client.close()

16、查看路由器的运行时间：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display clock")
clock_info = stdout.readlines()for line in clock_info:print(line.strip())client.close()

17、查看路由器的接口详细信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface")
interface_info = stdout.readlines()for line in interface_info:print(line.strip())client.close()

18、查看路由器的NAT转换表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display nat session table")
nat_table = stdout.readlines()for line in nat_table:print(line.strip())client.close()

19、查看路由器的DNS服务器列表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dns server")
dns_info = stdout.readlines()for line in dns_info:print(line.strip())client.close()

20、查看路由器的DHCP服务器配置：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dhcp server configuration")
dhcp_info = stdout.readlines()for line in dhcp_info:print(line.strip())client.close()

这些Python脚本可以帮助你快速查看华为路由器的各种信息，也可以作为开发的基础，进行更多高级的操作和自动化任务。

http://www.yayakq.cn/news/499200/

相关文章：

  • 郑州正规的网站建设价格工地用的木模板是什么板
  • wordpress导入网站做网站商城的小图标软件
  • sofish wordpress主题成都关键词优化技术
  • 网站做多久能盈利旅游网络营销案例
  • 如何做漫画赚钱的网站桂林房价
  • 手机网站跳转怎么办网页制作工具哪个好用
  • 楚雄市建设规划批前公示在那个网站网站建设推广代理商
  • 网站导航如何做半透明巴南城乡建设网站
  • 网站定位广告做民俗酒店到哪些网站推荐
  • 好模版网站网站什么开发
  • 长沙网站seo费用门户网站建设自评报告
  • 高端网站定制站南宁公司网站设计
  • 怎样做淘宝推广网站xml做网站
  • wp如何做双语网站2024装修图片100张
  • 忘记网站后台用户名网站制作价
  • c可以做网站么快速建设一个网站
  • 个人网站设计制作步骤深圳网站建设 营销
  • 开公司如何做网站推广页面公司网站首页制作教程
  • 金坛区建设工程质量监督网站网站建设与管理 pdf
  • 用asp.net做的网站河南省建设厅网站 吴浩
  • 做图库网站用什么系统软件wordpress wiki使用
  • 网站开发绩效考核做网站挣钱不
  • 一流的商城网站建设建一个快讯网站要多少钱
  • 布吉做网站个人建网站wordpress
  • 川汇网站建设高端品牌职业女套装
  • 携程网站建设进度及实施过程网站建设的缺点
  • dede网站后缀乱码优化关键词排名seo
  • 手机网站模板 学校珠海网站制作报价
  • 我的网站dede优化设计答案六年级上册
  • 丹阳官方网站建站企业商城网站建设开发