口碑好的丹阳网站建设网站访问者qq

openssl3.2 - 官方demo学习 - guide - quic-client-block.c

概述

在程序运行时, 要指定环境变量 SSL_CERT_FILE=rootcert.pem, 同时将rootcert.pem拷贝到工程目录下, 否则不好使
吐槽啊, 为啥不用命令行参数或者API参数传进来啊, 整啥环境变量啊, 看着膈应.

quic服务启动(openssl3.2 - quic服务的运行)时的命令行为 quicserver.exe -trace localhost 23456 servercert.pem serverkey.pem
本程序(quic客户端)命令行只能为 localhost 23456 才行
用 127.0.0.1 23456 不好使.

如果要单步调试, 得赶紧的. quic服务启动后, 如果30秒内没有客户端来, quic服务会退出, 这太不礼貌了…
只能跑一下, 听个响, 学不到东西.

这个demo, 是不是只想展示, openssl可以作为quic客户端程序的tls实现?

笔记

/*!
* \file quic-client-block.c
* \note openssl3.2 - 官方demo学习 - guide - quic-client-block.c
* 在程序运行时, 要指定环境变量 SSL_CERT_FILE=rootcert.pem, 同时将rootcert.pem拷贝到工程目录下, 否则不好使
* 吐槽啊, 为啥不用命令行参数或者API参数传进来啊, 整啥环境变量啊, 看着膈应.
* 
* quic服务启动时的命令行为 quicserver.exe -trace localhost 23456 servercert.pem serverkey.pem
本程序(quic客户端)命令行只能为 localhost 23456 才行
用 127.0.0.1 23456 不好使.如果要单步调试, 得赶紧的. quic服务启动后, 如果30秒内没有客户端来, quic服务会退出, 这太不礼貌了...
只能跑一下, 听个响, 学不到东西.这个demo, 是不是只想展示, openssl可以作为quic客户端程序的tls实现?
*//**  Copyright 2023 The OpenSSL Project Authors. All Rights Reserved.**  Licensed under the Apache License 2.0 (the "License").  You may not use*  this file except in compliance with the License.  You can obtain a copy*  in the file LICENSE in the source distribution or at*  https://www.openssl.org/source/license.html*//** NB: Changes to this file should also be reflected in* doc/man7/ossl-guide-quic-client-block.pod*/#include <string.h>/* Include the appropriate header file for SOCK_DGRAM */
#ifdef _WIN32 /* Windows */
# include <winsock2.h>
#else /* Linux/Unix */
# include <sys/socket.h>
#endif#include <openssl/bio.h>
#include <openssl/ssl.h>
#include <openssl/err.h>#include "my_openSSL_lib.h"/* Helper function to create a BIO connected to the server */
static BIO* create_socket_bio(const char* hostname, const char* port,int family, BIO_ADDR** peer_addr)
{int sock = -1;BIO_ADDRINFO* res;const BIO_ADDRINFO* ai = NULL;BIO* bio;/** Lookup IP address info for the server.*/if (!BIO_lookup_ex(hostname, port, BIO_LOOKUP_CLIENT, family, SOCK_DGRAM, 0,&res))return NULL;/** Loop through all the possible addresses for the server and find one* we can connect to.*/for (ai = res; ai != NULL; ai = BIO_ADDRINFO_next(ai)) {/** Create a UDP socket. We could equally use non-OpenSSL calls such* as "socket" here for this and the subsequent connect and close* functions. But for portability reasons and also so that we get* errors on the OpenSSL stack in the event of a failure we use* OpenSSL's versions of these functions.*/sock = BIO_socket(BIO_ADDRINFO_family(ai), SOCK_DGRAM, 0, 0);if (sock == -1)continue;/* Connect the socket to the server's address */if (!BIO_connect(sock, BIO_ADDRINFO_address(ai), 0)) {BIO_closesocket(sock);sock = -1;continue;}/* Set to nonblocking mode */if (!BIO_socket_nbio(sock, 1)) {BIO_closesocket(sock);sock = -1;continue;}break;}if (sock != -1) {*peer_addr = BIO_ADDR_dup(BIO_ADDRINFO_address(ai));if (*peer_addr == NULL) {BIO_closesocket(sock);return NULL;}}/* Free the address information resources we allocated earlier */BIO_ADDRINFO_free(res);/* If sock is -1 then we've been unable to connect to the server */if (sock == -1)return NULL;/* Create a BIO to wrap the socket */bio = BIO_new(BIO_s_datagram());if (bio == NULL) {BIO_closesocket(sock);return NULL;}/** Associate the newly created BIO with the underlying socket. By* passing BIO_CLOSE here the socket will be automatically closed when* the BIO is freed. Alternatively you can use BIO_NOCLOSE, in which* case you must close the socket explicitly when it is no longer* needed.*/BIO_set_fd(bio, sock, BIO_CLOSE);return bio;
}/** Simple application to send a basic HTTP/1.0 request to a server and* print the response on the screen. Note that HTTP/1.0 over QUIC is* non-standard and will not typically be supported by real world servers. This* is for demonstration purposes only.*/
int main(int argc, char* argv[])
{SSL_CTX* ctx = NULL;SSL* ssl = NULL;BIO* bio = NULL;int res = EXIT_FAILURE;int ret;unsigned char alpn[] = { 8, 'h', 't', 't', 'p', '/', '1', '.', '0' };const char* request_start = "GET / HTTP/1.0\r\nConnection: close\r\nHost: ";const char* request_end = "\r\n\r\n";size_t written, readbytes;char buf[160];BIO_ADDR* peer_addr = NULL;char* hostname, * port;int argnext = 1;int ipv6 = 0;if (argc < 3) {printf("Usage: quic-client-block [-6] hostname port\n");goto end;}if (!strcmp(argv[argnext], "-6")) {if (argc < 4) {printf("Usage: quic-client-block [-6] hostname port\n");goto end;}ipv6 = 1;argnext++;}hostname = argv[argnext++];port = argv[argnext];/** Create an SSL_CTX which we can use to create SSL objects from. We* want an SSL_CTX for creating clients so we use* OSSL_QUIC_client_method() here.*/ctx = SSL_CTX_new(OSSL_QUIC_client_method());if (ctx == NULL) {printf("Failed to create the SSL_CTX\n");goto end;}/** Configure the client to abort the handshake if certificate* verification fails. Virtually all clients should do this unless you* really know what you are doing.*/SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, NULL);/* Use the default trusted certificate store */if (!SSL_CTX_set_default_verify_paths(ctx)) {printf("Failed to set the default trusted certificate store\n");goto end;}/* Create an SSL object to represent the TLS connection */ssl = SSL_new(ctx);if (ssl == NULL) {printf("Failed to create the SSL object\n");goto end;}/** Create the underlying transport socket/BIO and associate it with the* connection.*/bio = create_socket_bio(hostname, port, ipv6 ? AF_INET6 : AF_INET, &peer_addr);if (bio == NULL) {printf("Failed to crete the BIO\n");goto end;}SSL_set_bio(ssl, bio, bio);/** Tell the server during the handshake which hostname we are attempting* to connect to in case the server supports multiple hosts.*/if (!SSL_set_tlsext_host_name(ssl, hostname)) {printf("Failed to set the SNI hostname\n");goto end;}/** Ensure we check during certificate verification that the server has* supplied a certificate for the hostname that we were expecting.* Virtually all clients should do this unless you really know what you* are doing.*/if (!SSL_set1_host(ssl, hostname)) {printf("Failed to set the certificate verification hostname");goto end;}/* SSL_set_alpn_protos returns 0 for success! */if (SSL_set_alpn_protos(ssl, alpn, sizeof(alpn)) != 0) {printf("Failed to set the ALPN for the connection\n");goto end;}/* Set the IP address of the remote peer */if (!SSL_set1_initial_peer_addr(ssl, peer_addr)) {printf("Failed to set the initial peer address\n");goto end;}/*! 到这就要将quic服务开起来, 否则连接失败 *//* Do the handshake with the server */if (SSL_connect(ssl) < 1) {printf("Failed to connect to the server\n");/** If the failure is due to a verification error we can get more* information about it from SSL_get_verify_result().*/if (SSL_get_verify_result(ssl) != X509_V_OK)printf("Verify error: %s\n",X509_verify_cert_error_string(SSL_get_verify_result(ssl)));goto end;}/* Write an HTTP GET request to the peer */if (!SSL_write_ex(ssl, request_start, strlen(request_start), &written)) {printf("Failed to write start of HTTP request\n");goto end;}if (!SSL_write_ex(ssl, hostname, strlen(hostname), &written)) {printf("Failed to write hostname in HTTP request\n");goto end;}if (!SSL_write_ex(ssl, request_end, strlen(request_end), &written)) {printf("Failed to write end of HTTP request\n");goto end;}/** Get up to sizeof(buf) bytes of the response. We keep reading until the* server closes the connection.*//*! 这前面, 给服务器发了3句话这下面循环, 然后将服务器回包读完, 就往下走了 */while (SSL_read_ex(ssl, buf, sizeof(buf), &readbytes)) {/** OpenSSL does not guarantee that the returned data is a string or* that it is NUL terminated so we use fwrite() to write the exact* number of bytes that we read. The data could be non-printable or* have NUL characters in the middle of it. For this simple example* we're going to print it to stdout anyway.*/fwrite(buf, 1, readbytes, stdout);}/* In case the response didn't finish with a newline we add one now */printf("\n");/** Check whether we finished the while loop above normally or as the* result of an error. The 0 argument to SSL_get_error() is the return* code we received from the SSL_read_ex() call. It must be 0 in order* to get here. Normal completion is indicated by SSL_ERROR_ZERO_RETURN. In* QUIC terms this means that the peer has sent FIN on the stream to* indicate that no further data will be sent.*/switch (SSL_get_error(ssl, 0)) {case SSL_ERROR_ZERO_RETURN:/* Normal completion of the stream *//*! 最后是从这里break的 */break;case SSL_ERROR_SSL:/** Some stream fatal error occurred. This could be because of a stream* reset - or some failure occurred on the underlying connection.*/switch (SSL_get_stream_read_state(ssl)) {case SSL_STREAM_STATE_RESET_REMOTE:printf("Stream reset occurred\n");/* The stream has been reset but the connection is still healthy. */break;case SSL_STREAM_STATE_CONN_CLOSED:printf("Connection closed\n");/* Connection is already closed. Skip SSL_shutdown() */goto end;default:printf("Unknown stream failure\n");break;}break;default:/* Some other unexpected error occurred */printf("Failed reading remaining data\n");break;}/** Repeatedly call SSL_shutdown() until the connection is fully* closed.*/do {ret = SSL_shutdown(ssl); // 关断ssl需要好久...if (ret < 0) {printf("Error shutting down: %d\n", ret);goto end;}} while (ret != 1);/* Success! */res = EXIT_SUCCESS;
end:/** If something bad happened then we will dump the contents of the* OpenSSL error stack to stderr. There might be some useful diagnostic* information there.*/if (res == EXIT_FAILURE)ERR_print_errors_fp(stderr);/** Free the resources we allocated. We do not free the BIO object here* because ownership of it was immediately transferred to the SSL object* via SSL_set_bio(). The BIO will be freed when we free the SSL object.*/SSL_free(ssl);SSL_CTX_free(ctx);BIO_ADDR_free(peer_addr);return res;
}

END