当前位置： 首页 > news >正文

益阳做网站网页制作教程免费下载

news 2025/11/3 22:20:19
益阳做网站,网页制作教程免费下载,企业网站模板趋势,万网站长目录 实验条件网络拓朴 环境配置开始Troubleshooting问题1. R25和R22邻居关系没有建立问题2. 去往R25网络的下一跳地址不存在、不可用问题3. 去往目标网络的下一跳地址不存在、不可用 实验条件 网络拓朴 环境配置 在我的资源里可以下载（就在这篇文章的开头也可以下…

目录

  • 实验条件
    • 网络拓朴
  • 环境配置
  • 开始Troubleshooting
    • 问题1. R25和R22邻居关系没有建立
    • 问题2. 去往R25网络的下一跳地址不存在、不可用
    • 问题3. 去往目标网络的下一跳地址不存在、不可用

实验条件

网络拓朴

在这里插入图片描述
在这里插入图片描述
在这里插入图片描述

环境配置

在我的资源里可以下载（就在这篇文章的开头也可以下载）
在这里插入图片描述

开始Troubleshooting

检查所有接口的配置

Phone#show ipv int br
Ethernet0/0            [up/up]FE80::A8BB:CCFF:FE02:30002001:CC1E:BEEF:25::100
Ethernet0/1            [administratively down/down]unassigned
Ethernet0/2            [administratively down/down]unassigned
Ethernet0/3            [administratively down/down]unassignedR25#show ipv int br
Ethernet0/0            [up/up]FE80::A8BB:CCFF:FE02:20002001:CC1E:BEEF:25::1
Ethernet0/1            [up/up]FE80::A8BB:CCFF:FE02:20102001:CC1E:BEEF:2225::18
Loopback0              [up/up]FE80::A8BB:CCFF:FE02:20002001:CC1E:BEEF::2225
R25#R22#show ipv int br
Ethernet0/0            [up/up]unassigned
Ethernet0/1            [up/up]FE80::A8BB:CCFF:FE01:F0102001:CC1E:BEEF:2225::17
Ethernet1/0            [up/up]FE80::A8BB:CCFF:FE01:F0012001:CC1E:ABCD:2622::13

其它的两台路由器没有密码，应该是不需要调整的，
直接ping Server4的IPv6地址

Phone#ping 2001:BEEF:CAFE::26
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:BEEF:CAFE::26, timeout is 2 seconds:
UUUUU
Success rate is 0 percent (0/5)
Phone#traceroute 2001:BEEF:CAFE::26
Type escape sequence to abort.
Tracing the route to 2001:BEEF:CAFE::261 2001:CC1E:BEEF:25::1 !U  !U  !U 
Phone#

ping包出现U表示目标不可达的意思, 就是路由器在查询路由表的时候没有目标网络的路由表，而且也没有默认路由，这时就回给源路由器一个目标不可达，源路由器就显示一个U的标记；

数据包到达了网关R25之后就没有下一跳的路由了，查询R25的路由相关配置

R25#show ipv route      
IPv6 Routing Table - default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static routeB - BGP, HA - Home Agent, MR - Mobile Router, R - RIPH - NHRP, I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interareaIS - ISIS summary, D - EIGRP, EX - EIGRP external, NM - NEMOND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - RedirectRL - RPL, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2la - LISP alt, lr - LISP site-registrations, ld - LISP dyn-eidlA - LISP away, a - Application
LC  2001:CC1E:BEEF::2225/128 [0/0]via Loopback0, receive
C   2001:CC1E:BEEF:25::/64 [0/0]via Ethernet0/0, directly connected
L   2001:CC1E:BEEF:25::1/128 [0/0]via Ethernet0/0, receive
C   2001:CC1E:BEEF:2225::/64 [0/0]via Ethernet0/1, directly connected
L   2001:CC1E:BEEF:2225::18/128 [0/0]via Ethernet0/1, receive
L   FF00::/8 [0/0]via Null0, receive
R25#show run | s router          
router bgp 65101bgp log-neighbor-changesneighbor 123.1.2.17 remote-as 12345!address-family ipv4neighbor 123.1.2.17 activateexit-address-family!address-family ipv6network 2001:CC1E:BEEF::2225/128network 2001:CC1E:BEEF:25::/64neighbor 123.1.2.17 activateexit-address-family

没有目标的路由信息，路由协议采用的是BGP协议， 查看一下BGP邻居状态情况

R25#show ip bgp summary
BGP router identifier 202.65.1.5, local AS number 65101
BGP table version is 1, main routing table version 1Neighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
123.1.2.17      4        12345       0       0        1    0    0 never    Idle

发现R25和R22的邻居关系没有起来、查询R22的路由表信息，发现在R22上有和R26的邻居关系且有目标网络的路由信息且能ping通到目标网络。

R22#show ipv route
IPv6 Routing Table - default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static routeB - BGP, HA - Home Agent, MR - Mobile Router, R - RIPH - NHRP, I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interareaIS - ISIS summary, D - EIGRP, EX - EIGRP external, NM - NEMOND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - RedirectRL - RPL, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2la - LISP alt, lr - LISP site-registrations, ld - LISP dyn-eidlA - LISP away, a - Application
B   2001:BEEF:CAFE::/64 [20/0]via FE80::A8BB:CCFF:FE02:10, Ethernet1/0
C   2001:CC1E:ABCD:2622::/64 [0/0]via Ethernet1/0, directly connected
L   2001:CC1E:ABCD:2622::13/128 [0/0]via Ethernet1/0, receive
C   2001:CC1E:BEEF:2225::/64 [0/0]via Ethernet0/1, directly connected
L   2001:CC1E:BEEF:2225::17/128 [0/0]via Ethernet0/1, receive
L   FF00::/8 [0/0]via Null0, receive
R22#show ip bgp summary
BGP router identifier 134.22.22.22, local AS number 12345
BGP table version is 6, main routing table version 6
5 network entries using 720 bytes of memory
5 path entries using 420 bytes of memory
2/2 BGP path/bestpath attribute entries using 320 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1484 total bytes of memory
BGP activity 6/0 prefixes, 6/0 paths, scan interval 60 secsNeighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
123.1.2.18      4        65101       0       0        1    0    0 never    Idle (Admin)
123.3.3.3       4        12345       0       0        1    0    0 never    Idle
123.5.5.5       4        12345       0       0        1    0    0 never    Idle
134.21.21.21    4        12345       0       0        1    0    0 never    Idle
134.56.78.14    4        10001      22      19        6    0    0 00:15:40        5
R22#ping 2001:BEEF:CAFE::26
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:BEEF:CAFE::26, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
R22#

那么只需要解决R22和R25的邻居关系且把目标的网络让R25接收就可以达到我们的目标。

问题1. R25和R22邻居关系没有建立

之前看了R25的BGP配置没有发现异常、继续检查R22的BGP配置

R22#show run | s router bgp
router bgp 12345bgp router-id 134.22.22.22bgp log-neighbor-changesneighbor PEER peer-groupneighbor PEER remote-as 12345neighbor 2001:CC1E:ABCD:2622::12 remote-as 10001neighbor 123.1.2.18 remote-as 65101neighbor 123.1.2.18 shutdownneighbor 123.3.3.3 peer-group PEERneighbor 123.5.5.5 peer-group PEERneighbor 134.21.21.21 peer-group PEERneighbor 134.56.78.14 remote-as 10001!address-family ipv4neighbor PEER next-hop-selfno neighbor 2001:CC1E:ABCD:2622::12 activateneighbor 123.1.2.18 activateneighbor 123.3.3.3 activateneighbor 123.5.5.5 activateneighbor 134.21.21.21 activateneighbor 134.56.78.14 activateneighbor 134.56.78.14 route-map MED outexit-address-family!        address-family ipv6neighbor 2001:CC1E:ABCD:2622::12 activateneighbor 123.1.2.18 activateneighbor 123.1.2.18 route-map NEXT-HOP outexit-address-family
R22#

发现邻居关系被 Shutdown了，no shutdown就可以了


R22#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
R22(config)#router bgp 12345
R22(config-router)#no neighbor 123.1.2.18 shutdown
R22(config-router)#
%BGP-5-ADJCHANGE: neighbor 123.1.2.18 Up 
R22(config-router)#do show ip bgp summary
BGP router identifier 134.22.22.22, local AS number 12345
BGP table version is 6, main routing table version 6
5 network entries using 720 bytes of memory
5 path entries using 420 bytes of memory
2/2 BGP path/bestpath attribute entries using 320 bytes of memory
2 BGP AS-PATH entries using 48 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1508 total bytes of memory
BGP activity 8/0 prefixes, 8/0 paths, scan interval 60 secsNeighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
123.1.2.18      4        65101       6       8        6    0    0 00:00:10        0
123.3.3.3       4        12345       0       0        1    0    0 never    Idle
123.5.5.5       4        12345       0       0        1    0    0 never    Idle
134.21.21.21    4        12345       0       0        1    0    0 never    Idle
134.56.78.14    4        10001      27      25        6    0    0 00:20:47        5
R22(config-router)#

发现R22和R25的邻居关系已经正常，查看BGP路由信息

R22(config-router)#do show bgp ipv6 unicast        
BGP table version is 2, local router ID is 134.22.22.22
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not foundNetwork          Next Hop            Metric LocPrf Weight Path*>   2001:BEEF:CAFE::/642001:CC1E:ABCD:2622::120 10001 i*    2001:CC1E:BEEF::2225/128::FFFF:123.1.2.180             0 65101 i*    2001:CC1E:BEEF:25::/64::FFFF:123.1.2.180             0 65101 i

R25#show bgp ipv6 unicast 
BGP table version is 3, local router ID is 202.65.1.5
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not foundNetwork          Next Hop            Metric LocPrf Weight Path*    2001:BEEF:CAFE::/64::FFFF:123.1.2.170 12345 10001 i*>   2001:CC1E:BEEF::2225/128::                       0         32768 i*>   2001:CC1E:BEEF:25::/64::                       0         32768 i
R25#

问题2. 去往R25网络的下一跳地址不存在、不可用

修改去往R25网络的下一跳地址，查询到R25上有配置了一个route-map 下一跳地址是R25的E0/1

R25#show run | s router
router bgp 65101bgp log-neighbor-changesneighbor 123.1.2.17 remote-as 12345!address-family ipv4neighbor 123.1.2.17 activateexit-address-family!address-family ipv6network 2001:CC1E:BEEF::2225/128network 2001:CC1E:BEEF:25::/64neighbor 123.1.2.17 activateexit-address-family
R25#show route-map
route-map NEXT-HOP, permit, sequence 10Match clauses:Set clauses:ipv6 next-hop 2001:CC1E:BEEF:2225::18Policy routing matches: 0 packets, 0 bytes
R25#

next-hop 2001:CC1E:BEEF:2225::18 这个IP地址是R25的 e0/1口，那说明这个route-map是为了修改BGP邻居访问network 2001:CC1E:BEEF::2225/128，network 2001:CC1E:BEEF:25::/64时指定下一跳为自己的e0/1口，那说明这个route-map应该配置在out的方向上

R25#conf t
R25(config)#router bgp 65101
R25(config-router-af)#address-family ipv6
R25(config-router-af)#neighbor 123.1.2.17 route-map NEXT-HOP out
R25(config-router-af)#do show run | s router bgp
router bgp 65101bgp log-neighbor-changesneighbor 123.1.2.17 remote-as 12345!address-family ipv4neighbor 123.1.2.17 activateexit-address-family!address-family ipv6network 2001:CC1E:BEEF::2225/128network 2001:CC1E:BEEF:25::/64neighbor 123.1.2.17 activateneighbor 123.1.2.17 route-map NEXT-HOP outexit-address-family
R25(config-router-af)#

在R22的路由器上，查询BGP表

R22#show bgp ipv6 unicast
BGP table version is 4, local router ID is 134.22.22.22
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not foundNetwork          Next Hop            Metric LocPrf Weight Path*>   2001:BEEF:CAFE::/642001:CC1E:ABCD:2622::120 10001 i*>   2001:CC1E:BEEF::2225/1282001:CC1E:BEEF:2225::180             0 65101 i*>   2001:CC1E:BEEF:25::/642001:CC1E:BEEF:2225::180             0 65101 i
R22#show ipv route
IPv6 Routing Table - default - 8 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static routeB - BGP, HA - Home Agent, MR - Mobile Router, R - RIPH - NHRP, I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interareaIS - ISIS summary, D - EIGRP, EX - EIGRP external, NM - NEMOND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - RedirectRL - RPL, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2la - LISP alt, lr - LISP site-registrations, ld - LISP dyn-eidlA - LISP away, a - Application
B   2001:BEEF:CAFE::/64 [20/0]via FE80::A8BB:CCFF:FE02:10, Ethernet1/0
C   2001:CC1E:ABCD:2622::/64 [0/0]via Ethernet1/0, directly connected
L   2001:CC1E:ABCD:2622::13/128 [0/0]via Ethernet1/0, receive
B   2001:CC1E:BEEF::2225/128 [20/0]via FE80::A8BB:CCFF:FE02:2010, Ethernet0/1
B   2001:CC1E:BEEF:25::/64 [20/0]via FE80::A8BB:CCFF:FE02:2010, Ethernet0/1
C   2001:CC1E:BEEF:2225::/64 [0/0]via Ethernet0/1, directly connected
L   2001:CC1E:BEEF:2225::17/128 [0/0]via Ethernet0/1, receive
L   FF00::/8 [0/0]via Null0, receive

下一跳已经正常，且已经加进路由表中

问题3. 去往目标网络的下一跳地址不存在、不可用

修改去往目标网络的下一跳地址，查询到R22上的BGP有配置了一个route-map NEXT-HOP

R22#show run | s router bgp
router bgp 12345bgp router-id 134.22.22.22bgp log-neighbor-changes
......!address-family ipv6......neighbor 123.1.2.18 route-map NEXT-HOP outexit-address-family
R22#show route-map NEXT-HOP
route-map NEXT-HOP, permit, sequence 10Match clauses:Set clauses:Policy routing matches: 0 packets, 0 bytes
R22#

却是什么都没有配置、这导致R25去往目标网络时的下跳变成了::FFFF:123.1.2.17这个无效地址，因此配置一下set next-hop解决这个问题（ipv4建邻居，传ipv6路由和ipv6建邻居，传ipv4路由的下一跳都会出现问题需要手动修改）

R22#conf t
R22(config)#route-map NEXT-HOP permit 10
R22(config-route-map)#set ipv next-hop 2001:CC1E:BEEF:2225::17
R22(config-route-map)#do show route-map NEXT-HOP
route-map NEXT-HOP, permit, sequence 10Match clauses:Set clauses:ipv6 next-hop 2001:CC1E:BEEF:2225::17Policy routing matches: 0 packets, 0 bytes
R22(config-route-map)#

在R25上查看BGP路由表

R25#show bgp ipv6 unicast        
BGP table version is 4, local router ID is 202.65.1.5
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not foundNetwork          Next Hop            Metric LocPrf Weight Path*>   2001:BEEF:CAFE::/642001:CC1E:BEEF:2225::170 12345 10001 i*>   2001:CC1E:BEEF::2225/128::                       0         32768 i*>   2001:CC1E:BEEF:25::/64::                       0         32768 i
R25#show ipv route 
IPv6 Routing Table - default - 7 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static routeB - BGP, HA - Home Agent, MR - Mobile Router, R - RIPH - NHRP, I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interareaIS - ISIS summary, D - EIGRP, EX - EIGRP external, NM - NEMOND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - RedirectRL - RPL, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2la - LISP alt, lr - LISP site-registrations, ld - LISP dyn-eidlA - LISP away, a - Application
B   2001:BEEF:CAFE::/64 [20/0]via FE80::A8BB:CCFF:FE01:F010, Ethernet0/1
LC  2001:CC1E:BEEF::2225/128 [0/0]via Loopback0, receive
C   2001:CC1E:BEEF:25::/64 [0/0]via Ethernet0/0, directly connected
L   2001:CC1E:BEEF:25::1/128 [0/0]via Ethernet0/0, receive
C   2001:CC1E:BEEF:2225::/64 [0/0]via Ethernet0/1, directly connected
L   2001:CC1E:BEEF:2225::18/128 [0/0]via Ethernet0/1, receive
L   FF00::/8 [0/0]via Null0, receive
R25#

去往目标网络的下一跳已经正常，现在测试一下网络是否连通

Phone#ping 2001:BEEF:CAFE::26
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:BEEF:CAFE::26, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Phone#traceroute 2001:BEEF:CAFE::26
Type escape sequence to abort.
Tracing the route to 2001:BEEF:CAFE::261 2001:CC1E:BEEF:25::1 0 msec 0 msec 1 msec2 2001:CC1E:BEEF:2225::17 0 msec 0 msec 1 msec3 2001:CC1E:ABCD:2622::12 0 msec 1 msec 0 msec4 2001:BEEF:CAFE::26 1 msec 1 msec 0 msec
Phone#

网络通了，目标达成。

http://www.yayakq.cn/news/159434/

相关文章：

  • 北京学校网站建设公司北京自考网址
  • 网站底部信息wordpress 群发
  • 腾讯网站建设推广重庆网站建设培训机构
  • 屯留网站建设什么网站专做外贸
  • 个人网站空间多大合适中国新闻
  • 适合代码新手做的网站成都设计院工资
  • 织梦网站怎么加入引导页网站建设980元
  • 酒店网站html县市区科普网站建设
  • 湖北营销型网站建设价格推荐西安知名的集团门户网站建设公司
  • 门户网站建设工作总结中国建筑网官网查询证书
  • 机械网站建设百度首页排名优化平台
  • 电子元器件网站怎么做ui界面设计报告
  • 装饰行业模板网站稳定免费虚拟主机
  • 顺德制作网站价格多少html5制作的网站
  • 哪些网站可以免费推广网页设计公司背景
  • 做网站设计服务商免费虚拟机安卓
  • 腾讯空间个人认证 企业认证 网站认证哪种功能用途最齐全??二级建造师网官网
  • 成都官网优化推广seo推广外包
  • 企业制作企业网站唐山建设网站
  • 怎么做带网站连接的表格做房产的网站排名
  • 婚庆网站建设必要性做名片用哪个网站
  • 无锡网站的优化项城网站建设
  • xamp wordpress新上线的网站怎么做优化
  • 高质量的常州网站建设app界面怎么制作的
  • 王建设的网站互联网公司图片
  • 怎么更改网站备案信息中国建设工程造价管理系统
  • wordpress向登录页面跳转嘉兴优化网站价格
  • 网站开发2019商城建设网站
  • 国内知名网站建设伺普陀企业网站建设
  • 深圳网站设计 公司o2o商城网站建设